Copy procedure:
- Start copying until the " Verify Operation " screen appears.
- Press the menu button on the top right to enter manual recording as in the image below
- Move the slider above 5 seconds
- On the control unit press the " Prog " button for 2 seconds, the display should indicate " F0 "
- On the application press the " Transmit opening signal " button and wait 10 seconds
- While waiting the display should show " Add ' followed by " C1 "
- Wait about another 20 seconds
- Press " Next " at the bottom and test the opening using the " Open/Close " button
If this fails, repeat the procedure.