To complete the copy of your radio control
- Start copying until the "Check operation" screen
- Press the menu button at the top right to enter manual recording as in the image below
- Move the slider higher than 4 seconds
On the receiver, press the B button for 1 second, the integrated lighting starts to flash
On the app, press the "Send opening signal" button and wait 5 seconds
The integrated lighting turns off and on again
On the app, press the "Send opening signal" button again and wait 5 seconds
The integrated lighting turns off and on briefly to indicate successful storage
Press "Transmit opening signal" one last time. If the garage does not open, repeat the procedure, increasing the transmission time and waiting times.
BE CAREFUL not to press the B button for long as this deletes all the saved radio controls