To complete the copy of the remote control, follow the procedure below while being near the automation:
1) Start copying until you get to the "Check Operation" screen
2) Press the menu button at the top right to enter manual recording as shown in the image below
3) Move the slider above 5 seconds
4) On the control unit, press the "P1" or "P4" button (depending on the control unit) for 3 seconds, until the relevant LED lights up
5) Keeping the SOLO close to the control unit, press the "Transmit opening signal" button in the app and wait 10 seconds
6) The LED flashes 3 times to indicate correct learning of the signal
If the LED does not flash 3 times, wait 10 seconds and repeat the procedure starting from point 4, if necessary change the positioning of SOLO with respect to the control unit.