To be able to copy a FAAC radio control onto a second generation SOLO, you need to have a MASTER type (original) radio control.
To recognize a FAAC MASTER, press the button on the remote control and check what type of flash the LED emits:
- If it emits a short flash before turning on with a fixed light, it is a MASTER
- If it lights up immediately with a fixed light, it is a SLAVE and cannot be duplicated.
If you have a FAAC MASTER remote control, proceed by following this simple guide:
1. Open the 1Control App and press on settings.
2.If you have already installed Select " Manage your devices ".
3. Select SOLO
4. press on one of the available slots and start the procedure to copy the new remote .
5. The app automatically recognizes the remote control you are trying to copy and guides you step by step through the dedicated procedure .
While below you will find a video example of a copy of a FAAC remote control.
6. Once the procedure is completed, from the main screen of the app it will be possible to open the new gate / garage whose remote control you have just copied.
If you are experiencing troubles, consult the following guide:
https://1control.zendesk.com/hc/en-gb/articles/12433627378460
Otherwise, do not hesitate to contact our technical support by filling out the form at the following link: https://www.1control.eu/en/contattaci.php