Skip to main content

MIME

  • Updated

To complete the copy, follow the procedure as indicated

 

  1. Start copying until the "Check Operation" screen
  2. Press the menu button at the top right to enter manual recording as shown in the image below
  3. Move the slider above 4 seconds




  4. On the MIME receiver, press the side button 2 times, the receiver emits 2 flashes with the LED and 2 sounds
  5. Still on the receiver, keep the side key pressed for more than 3 seconds, the control unit emits a flash with the LED and a sound
  6. At this point, press the side button of the receiver once again, the receiver will emit with a single flash and a single sound every 2 seconds to indicate waiting in programming
  7. On the APP press transmit opening signal
  8. To confirm reception, the receiver will emit 2 LED flashes and 2 sounds, if you do not emit them, press the button on the app again
 

To complete wait for the timeout signaled by the receiver with a flashing of the LED and a sound

On the app, continue by pressing forward and completing the copy