Procedure for SLH remote-controls
To complete the copy, follow the procedure as indicated
- Start copying until the "Check Operation" screen
- Press the menu button at the top right to enter manual recording as shown in the image below
- Move the slider above 4 seconds
- On the control unit, press and hold down the SW3 (LOGIC) or SW2 (SPEED) key, respectively for total or partial opening, and while holding it down, also press SW1 (SETUP) until the LED starts flashing slowly.
- Within 5 seconds, press the Transmit opening signal button on the app.
- The LED will remain on for about 1 second indicating that the procedure has been successful.
- On the app, press the Transmit opening signal button to check if SOLO can open the gate.