To complete the copy of your remote control
- Start copying until the "Check Operation screen."
- Press the menu button at the top right to enter manual recording as shown in the image below
- Move the slider above 4 seconds
- Press the “- ” button on the control unit for 3 seconds, l1 lights up.
- Press the SET key, l1 and l5 light up alternately.
- Within 10 seconds, press the " Send opening signal " button on the app
- if the red LEDs light up for 1 second then the memorization was successful.
If the red LEDs all turn on flashing 3 times then the system has passed 10 seconds waiting without receiving any valid signal, repeat the programming.