OXI/OX2/SMXI/SMIF/SMXIS

1. Start copying until you get to the "Verify operation" screen, then select the 3 dots at the top right and press Manual recording (see image below)
2. Place the SOLO near the gate/garage control unit.
3. Wait until the gate/garage has closed completely.
4. On manual recording select 6 seconds on the top slider (highlighted in the image below)
   
   
   
5. Press and hold the button on the receiver until the LED on the receiver lights up (as soon as it lights up, release the button)
   
   
   
   
   
6. Press the "Transmit opening signal" button on the app and wait 10 seconds.
   
   
7. The LED next to the receiver button should flash 3 times to confirm copying.
8. Press "Next" and press the "Open/Close" button.