To complete the copy of your remote control
1) Start copying until the "Operation Check" screen
2) Press the menu key at the top right to enter manual recording as shown below
3) Move the slider above 4 seconds
4) In the gate receiver at the top right there are 3 buttons ( + (S1), OK (S2), - (S3 ). With the + and - buttons go to the radio item and press OK , then select the " Add ", press OK
5) The message " Hidden key " will appear on the control unit, on the original remote control press the key on the back, or if the two keys at the top are not present at the same time, as previously done in the copy, until the indication " Release ".
6) When the desired key appears on the control unit , press the Transmit opening signal key on the app
Wait for the control unit to exit programming mode and then continue with the procedure on the app.