To complete the copy, follow the procedure as indicated
- Start copying until the "Check Operation" screen
- Press the menu key at the top right to enter manual recording as in the image below
- Move the slider above 4 seconds
4. On the motor, press button P figure 1 once
5. The RT LED flashes once to confirm learning
6. Press the "Transmit open signal" button on the app screen, the red LED will flash quickly (figure 2 and 3)
7. Press the "Send opening signal" button again within 15 seconds until the LED flashes very quickly.
8. The red LED remains lit and the key on the remote control is programmed and ready for operation.