To complete the copy follow the procedure as indicated
- Start copying until you get to the "Verify Operation" screen
- Press the menu button on the top right to enter manual recording as in the image below
- Move the slider above 10 seconds
- On the control unit, press and hold the "CH1" button, the LED starts flashing
- On the application, press the "Transmit opening signal" button and wait approximately 5 seconds
- The LED lights up steadily to indicate that the code has been stored.
- Release the "CH1" button
If the LED does not light up steadily, release the "CH1" button, wait 5 seconds and repeat from step 4