To complete the copy follow the procedure as indicated
- Start copying until you get to the "Verify Operation" screen
- Press the menu button on the top right to enter manual recording as in the image below
- Move the slider above 6 seconds
- Place ONLY as close as possible to the control unit in question.
4. With the garage closed, press the LEARN button (highlighted in the photo).
5. The display will show "RL", the flashing light and the courtesy light will flash slowly.
6. Within 6 seconds, press the blue "send opening signal" button.
7. The flashing light and the courtesy light will flash quickly 3 times to confirm that the memory has been saved.
8. Wait for the control unit screen to turn off and automatically exit the new radio control memorization procedure.
9. Press "Next" and press the round "Open/Close" button to test operation.
If the automation does not open, try again with a longer transmission time (e.g. 6 or 8 seconds).