To complete the copy, follow the procedure as indicated
- Start copying until the "Check Operation" screen
- Press the menu button at the top right to enter manual recording as shown in the image below
- Move the slider above 4 seconds
- Press the " MEMO " button on the receiver and keep it pressed: the " L1 " LED flashes slowly
- On the application, press the " Send opening signal " button
- Keep “ MEMO ” pressed and wait until the “ L1 ” LED starts flashing again
- Press the " Transmit Open Signal " button on the application again
- End of memorisation: the “ L1 ” LED stays on for 2 seconds, indicating the correct memorisation.
- Release the " MEMO " button.