To complete the copy, follow the procedure as indicated
- Start copying until the "Check Operation" screen
- Press the menu button at the top right to enter manual recording as shown in the image below
- Move the slider above 4 seconds
- On the control unit press PROG 2 or 3 times, the green LED must be on (only the green LED)
- Press "-" for 3 seconds, L1 lights up. • Press OK, L1 and L4 light up alternately.
- Press the Transmit Open Tone button on the app
- The red leds all light up for 1 second (memorization successful).
If the red LEDs go off without flashing, it means that the system has exceeded the 10 second wait without receiving anything valid, restart programming.
