To complete the copy, follow the procedure as indicated
- Start copying until the "Check Operation" screen
- Press the menu key at the top right to enter manual recording as in the image below
- Move the slider above 10 seconds
- Place the "Strip" (Jumper), indicated in blue, as in figure "C1", highlighted in green on the left. (in case of copies for different channels it must be positioned on the correct figure "C", eg for channel 2 position on "C2")
- In the app, press "Send opening signal" and immediately afterwards press and hold the "P" button, highlighted in red, for 5 seconds.
- The indicator LED lights up to confirm the copy.
- Move the "Strip" so that it touches a single pin, with half of the jumper not attached to any contacts.