To complete the copy, follow the procedure as indicated
- Start copying until the "Check Operation" screen
- Press the menu key at the top right to enter manual recording as shown in the image below
- Move the slider above 4 seconds
- Press the " MEMO " button on the receiver and keep it pressed: the " L1 " LED flashes slowly
- On the application, press the " Send opening signal " button
- Keep " MEMO " pressed until the " L1 " LED starts flashing again, at which point release the " MEMO " key
- Press the " Transmit open signal " button on the application again
- End of memorisation: the “ L1 ” LED stays on for 2 seconds, indicating correct memorisation.