To complete the copy follow the procedure as indicated
- Start copying until you reach the "Check Operation" screen.
- Press the menu button at the top right to enter manual recording as shown in the image below
- Move the slider above 4 seconds
- Press the PROGRAM BROADCAST button for 1.5 seconds . The red LED lights up and a whistle-like sound is emitted. Release the button and the LED remains on.
- While the LED remains on, press "Transmit opening signal" in the app
- The red LED will flash and an acoustic signal will be activated to confirm that the memory has been saved.
- Wait 10 seconds for the control unit to exit programming mode, the LED turns off and two acoustic signals are emitted.
If the LED does not flash in step 6, please repeat the procedure by moving the SOLO closer to the control unit and increasing the transmission time entered in step 3.