To complete the copy of your radio control
- Start copying until the "Check operation" screen
- Press the menu button at the top right to enter manual recording as in the image below
- Move the slider above 10
- Holding the SOLO close to the control unit receiver (see next photo), press the " Transmit opening signal " button in the application
- Within 5 seconds, press the " P1 " button for approximately 1 second
- Wait approximately 10 seconds while holding the SOLO close to the receiver
- Press the " Next " button in the app
- Press the " Open/Close " button to check the copying result
- If the gate does not open, repeat the copy starting from point 2