To complete the copy follow the procedure as indicated
- Start copying until you get to the "Verify Operation" screen
- Press the menu button on the top right to enter manual recording as in the image below
- Move the slider above 3 seconds
- On the control unit, press the button highlighted in red until a zero appears on the display
- On the app, press the Transmit opening signal button, wait 5 seconds and press it again.
- The motor should beep and the display should turn off to indicate successful storage.
If the procedure does not work, set the transmission time to 2 seconds in step 3 and wait 3 seconds between one transmission and the next in step 5.