To complete the copy of your remote control
1) Start copying until the "Operation Check" screen
2) Press the menu key at the top right to enter manual recording as shown below
3) Move the slider above 4 seconds
4) In the gate receiver at the top right there are 3 buttons ( + (S1), OK (S2), - (S3 ). With the + and - buttons go to the radio item and press OK , then select the “ Agg.start ” (the translation may vary, it should be the first option available) , press OK
5) The writing hidden key will appear on the control unit, on the original remote control press the two keys at the top at the same time as previously done in the copy
6) When the desired key appears on the control unit , press the Transmit opening signal key on the app
Wait for the control unit to exit programming mode and then continue with the procedure on the app.