FLEX UNI PG

1. Start copying until the "Check Operation" screen
2. Press the menu key at the top right to enter manual recording as in the image below
3. Move the upper slider to 4 seconds
   
   
   
   
4. Press the P1 key, the CH1 LED turns on
   
   
   
   
5. Press the "Send opening signal" button in the app
6. The CH1 LED flashes 2 times to confirm signal copying.
7. Press the P1 key twice to exit programming mode.
   
   
   **depending on the channel used, it may be necessary to activate channel 2 (CH2)
   to activate the copy, just press the P1 key twice and the CH2 LED will light up