To complete the copy, follow the procedure as indicated
1) Start copying until the "Operation Check" screen
2) Press the menu key at the top right to enter manual recording as shown below
3) Move the slider above 4 seconds
1) Start copying until the "Operation Check" screen
2) Press the menu key at the top right to enter manual recording as shown below
3) Move the slider above 4 seconds
4) move the slider less than 3 seconds
5) On the remote control, press all the keys of the original remote control until the LED and the buzzer are activated on the control unit *
6) On the app, press the lower button Transmit source code
7) Once finished, press Send opening signal
the led and the buzzer turn off and reactivate to indicate the correct association
* For the TR2 remote control press both buttons, for the TR4 remote control press all 4 buttons