To complete the copy, follow the procedure as indicated
1 Start copying until the "Check operation" screen
2 Press the menu button at the top right to enter manual recording as in the image below
3 Move the slider less than 4 seconds
4 On the control unit, press the +/R1 button for 5 seconds, the DL11 (RADIO 1) LED should start to flash slowly
5 Within 5 seconds press Transmit source code on the app
6 The LED on the control unit remains lit steadily for 1 second and then turns off
7 Press the Transmit opening signal button on the app, the gate will open (make sure it is free to move)
If it doesn't work, repeat the procedure from step 4