1) Start copying until the "Check operation" screen
2) Press the menu button at the top right to enter manual recording as in the image below
3) Move the slider above 5 seconds
4) On the control unit, press the " P1 " button (highlighted in red) for 3 seconds, when the " P1 " LED (indicated in green) lights up, release the button
5) Press " Send opening signal " in the app.
6) The " P1 " LED flashes 3 times to indicate correct learning of the signal
If the LED does not flash 3 times, wait 10 seconds and repeat the procedure starting from point 4, if necessary bring the SOLO closer to the control unit, keeping it 10-15 cm away from it