To complete the copy, follow the procedure as indicated
- Start copying until the "Check Operation" screen
- Press the menu button at the top right to enter manual recording as shown in the image below
- Move the slider above 4 seconds
- On the control unit, keep the learning button ( A in the image) of the receiver pressed until the LED next to it (B in the image) turns green, at which point release the button
On the app, press the Transmit open signal button
The LED should flash 3 green to confirm the save.
The manual procedure requires you to hold down until the first of the 3 green flashes, so if the 3 seconds selected are too long or too short, adjust the timing accordingly by retrying the procedure from step 3 onwards.
Once the long transmission has been carried out, you can return the selector to 1 second and check that by pressing Send opening signal the gate opens.