To complete the copy of the remote control, follow the procedure below while being near the automation:
1) Start copying until you reach the "Check Operation" screen
2) Press the menu button at the top right to enter manual recording as shown in the image below
3) Move the slider above 5 seconds
4) Press the "T2" button on the control unit 4 times in a row (1 second press, 1 second wait)
5) Press the "send opening signal" button on the app
6) Wait about 30 seconds
7) Press "Next"
8) Press the "Open/Close" button a few times, waiting 5 seconds between each press, the gate should open.