1) Start copying until the "Operation Check" screen
2) Press the menu key at the top right to enter manual recording as shown in the image below
3) Move the slider above 5 seconds
4) On the control unit, press and immediately release the RADIO key (indicated in red), the LR LED (indicated in green) should flash
5) Press " Transmit opening signal " in the app.
6) The Display (shown in yellow) shows the following symbol to signal the successful completion of the copy
To memorize a second button with a different opening mode, press the RADIO button at point 4 as many times as required by the desired mode and the LED must flash a number of times equal to this value, the values are indicated in the following table:
|Opening command||Number of button presses|